B S C

robv1

New Member
Joined
1 Jul 2007
Messages
18
Visit site
We have just had our nimbus boat fail its bsc because of its fuel hose he had not seen before, the boat came from France and the pipes read hydarco 06, its a 1993 does anybody know if these are ok for the bsc
 
ISO 16147 spec rings a bell.
Can be sourced from various fuel pipe suppliers.
Then again as jimg says.
Talk to Jonas at Nimbus.
His English is more better than what mine is innit!
Spoke to im a few times ref me old 84 Nimbus.
Proper bod.
Check out the Nimbus web sight for contact No.s
Or PM me if yer gets stuck like!

I,m presuming by the way, that this for the Inland waterway safety thing?
 
mine passed on Thursday, took 3 hours to do a small 17ft bowride.. Completely by the book and very detailed which I thought was good as I know the boat's safer for the kids now... I'll have a look at the pipes fitted in the morning, iso 1740 rings a bell.
 
My fuel hoses failed and had to replaced to the BS as already stated here. I used jubilee clips to secure and it passed. The spring clips were on already and may have lost some tension, but don't kniow if this was the issue. I don't know if this will help. BSS can be a pain and some surveyors are not as picky as others. Bit like MP's I surpose :-)
 

Other threads that may be of interest

Top