Avon Dingy Pump - Bellows material replacement

theotter

Well-Known Member
Joined
28 Nov 2004
Messages
98
Location
Lymington
Visit site
Does anyone know if it is possible to get a replacement for the fabric part of an Avon dingy pump and if so where?? The pump in question is the one with the three outlets one of which is for the higher pressure floor.
 
Not sure of the pump to which you refer, but I think that the basic pump belows is / was Hypalon, the same as the dinghy.
 
The old type made with plywood top and bottom boards almost ceratinly use Hypalon fabric as the bellows

The more recent plastic ones I would think are more likely to use PVC coated fabric
 
The last time mine needed repairing I used Duck Tape.
Lasted a couple of seasons, then I put on some more!
sam :-)
(VicS - 25,410 posts in 10 years? That's 7 a day, every day for 10 years - You need to get out more!!!)
 
Last edited:
(VicS - 25,410 posts in 10 years? That's 7 a day, every day for 10 years - You need to get out more!!!)

No its longer than that. The join date shown is the date of some past major forum soft ware update.

There are people with more posts than me... more than double in one case and several with more than 20k posts. Also there is one very high level poster who had his post count reset to zero recently for reasons better know to himself.

What else is there to do on cold winter evenings with SWMBO watching all the rubbish she does on TV. It's alright for you youngsters

Darn ! thats one more post just replying to you :(
 
Last edited:
Top