Anyone know of an adaptor to use Fein tools with Challenge Xtreme multimaster?

[Gerry]

I would like to use the Fein teak-deck routing blade with the eight-point-star hole in a Challenge Xtreme multimaster. Is there a commercial adapter for Fein tools to Challenge Xtreme? Or is there a commercial adapter for Fein tools to Bosch (I know there are adapters for Bosch tools to Challenge Xtreme, maybe it can be done with two adaptors?). Or has anyone done this in any other way? For example, by drilling holes in the Fein tool to match the Challenge Xtreme mounting? If so, was this relatively easy or did you need a special drill for the Fein tool steel? Any suggestions?

 

[Laundryman]

I have a 'cheapy' oscillating multi tool. It may not be the quality of a Fein but for the occasional use, it's fine. I buy the attachments from an eBay shop called, Buytoolsdirect. My last lot were labelled 'Draper' but I suspect they will fit yours. In the absence of any other replies, have a look. Good luck. Alan

 

[Gerry]

Thank you Laundryman for the Buytoolsdirect suggestion. It now looks as though this adapter may do what I want : http://joaliff.com/index.php?route=product/product&product_id=51

The Challenge Xtreme multitool is £35 from Argos. I am going to check some dimensions, then - if OK - buy one and will report back how I get on.