Any reviews of CU Pro Antifoul?

Having been a Seaforce 30 user I used CU-Pro last winter. The boat came out at the end of September for a quick jet wash, anode check and greasing of KIWI prop then back in. The bottom had a thin coat of slime which was easily removed indeed the yard guy turned down the pressure. It was the best of the boats that came out so the yard guys said and indeed it looked good. I will take it out in May time again so that will be the test. So far so good.
 
I used it last year for the first time in a high fouling area and it worked very well. The best product I have used in fact. You do have to have regular trips of a fair distance for it to keep clean. They have changed the formulae this year but I have some ready to apply and lets hope it is as good as last season.
 
I used it last year for the first time in a high fouling area and it worked very well. The best product I have used in fact. You do have to have regular trips of a fair distance for it to keep clean. They have changed the formulae this year but I have some ready to apply and lets hope it is as good as last season.
It has been shown that what constitutes a good antifouling treatment for one harbour may be poor in the next. Can you tell those of us desperate for a good alternative whereabouts this was?
 
West Mersea swinging mooring. Just ordered mine for this season. Used it for 2 previous seasons and before that Jotun Non Stop.
Easier to apply than non stop and gives the best results I’ve seen so far.
 
Top