Observer
Well-Known Member
Need to order new anodes for Vetus bow and stern thrusters (80kgf). Also 2" shaft anode, trim tab anodes and bar anodes. Any special recommendations of suppliers - seems to be wide variation in prices.
Anode supplier
- Thread starter Observer
- Start date
whisper
Well-Known Member
This year I used www.zincsmart.com/. Very good service at very good prices.
Observer
Well-Known Member
Thanks.
Zincsmart Z15 bar anode 8kg £41.40 incl VAT
MG Duff ZD72BM bar anode 6.5kg £125.38 incl VAT (from Aqua-Marine)
Is there any reason not to do the obvious. A lump of zinc is a lump of zinc - no?
Zincsmart Z15 bar anode 8kg £41.40 incl VAT
MG Duff ZD72BM bar anode 6.5kg £125.38 incl VAT (from Aqua-Marine)
Is there any reason not to do the obvious. A lump of zinc is a lump of zinc - no?
5555
New Member
jhr
Well-Known Member
[ QUOTE ]
A lump of zinc is a lump of zinc - no?
[/ QUOTE ] Not sure. I've heard it said that "all lumps of zinc are equal, but some are more equal than others" and there have been occasional stories of anodes that waste away suspiciously fast. Whether this is down to the amount of zinc in the anode (I assume, in reality that they're a zinc compound, rather than a pure element) I do not know, as my chemistry ended with a fail and a whimper at "O" Level.
Caution may be advised......
A lump of zinc is a lump of zinc - no?
[/ QUOTE ] Not sure. I've heard it said that "all lumps of zinc are equal, but some are more equal than others" and there have been occasional stories of anodes that waste away suspiciously fast. Whether this is down to the amount of zinc in the anode (I assume, in reality that they're a zinc compound, rather than a pure element) I do not know, as my chemistry ended with a fail and a whimper at "O" Level.
Caution may be advised......
BrendanS
Well-Known Member
I'd have a word with Duncan. He had a bad experience with a mechanic fitting non brand name anodes if I recall correctly
whisper
Well-Known Member
I think Zsmart also sell McDuff products. Anyway, we've put our anodes on and will see what happens.
In previous threads on this subject (there have been many) no one has said that the Zsmart ones gave an inferior performance. Provided that they are the correct pattern and size, therefore, I'd buy them and try them.
In previous threads on this subject (there have been many) no one has said that the Zsmart ones gave an inferior performance. Provided that they are the correct pattern and size, therefore, I'd buy them and try them.
DAKA
Well-Known Member
I agree with the recommendation of www.zincsmart.com
No a lump of cheap cast zinc is not a lump of Zinc but could have all sorts of scrap included in the Zinc melt.
Of course the quicker the Zinc erodes the better protection you have given your running gear , (as longer as it doesnt wear out before you change next)
I agree with the recommendation of zincsmart and I have found the company incredibly helpful and knowledgeable.
No a lump of cheap cast zinc is not a lump of Zinc but could have all sorts of scrap included in the Zinc melt.
Of course the quicker the Zinc erodes the better protection you have given your running gear , (as longer as it doesnt wear out before you change next)
I agree with the recommendation of zincsmart and I have found the company incredibly helpful and knowledgeable.
tico
Well-Known Member
Echo DAKAs comments..... prime example of great service in the marine business. Wish there were more like them.
PS no connection other that as a satisfied customer.
PS no connection other that as a satisfied customer.
omega2
Well-Known Member
get the same as zincsmart at Magic marine, for £46 a pair, can be found on ebay, type zinc anodes, identical gear.