AIS NMEA to Raymarine C80

[murri]

Help pls!

I'd like to connect my Navicom VHF AIS NMEA output cables to Raymarine C80: where?

Thank you very much

ciao

maurizio

 

[ianj99]

From the C80 specs:
Interfaces
NMEA 0183 Input
GLL, GGA, GLC, GTD, VTG, BWC, BWR, RMA, RMB, RMC, XTE, VHW, HDG, HDM, HDT, DBT, DPT, APB, VLW, MWV, WPL, RTE, DSC and ZDA. Selectable to 4800, 4800 Navtex, 9600 Navtex or 38,400 AIS

So just connect the Navicom to the nmea input and set the baud rate to 38400. I have a Navicom too and I think you can set the baud rate to 4800 or 38400 for ais output.

If you are already using the nmea input you will need a multiplexer such as a Shipmodul.com Shipmodul USB. (I think their S module is also badged as a Raymarine)

 

[murri]

From the C80 specs:
Interfaces
NMEA 0183 Input
GLL, GGA, GLC, GTD, VTG, BWC, BWR, RMA, RMB, RMC, XTE, VHW, HDG, HDM, HDT, DBT, DPT, APB, VLW, MWV, WPL, RTE, DSC and ZDA. Selectable to 4800, 4800 Navtex, 9600 Navtex or 38,400 AIS

So just connect the Navicom to the nmea input and set the baud rate to 38400. I have a Navicom too and I think you can set the baud rate to 4800 or 38400 for ais output.

If you are already using the nmea input you will need a multiplexer such as a Shipmodul.com Shipmodul USB. (I think their S module is also badged as a Raymarine)

Thank you!

BTW, which is the pinout for the NMEA back panel connector?

grazie

Maurizio