2 inch Holesaw recommendation?

[AndrewL]

I've got a set of Toolpak bi-metal holesaws which I bought from Toolstation. I used a 120mm to go through the cabin top when installing a vent, it made a clean cut without much effort. I've also used a 40mm one to cut through 3mm of stainless steel.

M3 Bi Metal Holesaw 51mm

 

[Rappey]

The screwfix/toolstation bimetal cheap holesaws are good and will even cut stainless with plenty of lube and common sense.
The cheap chinese sets are OK for grp and wood but take a little longer to cut.
Pointless spending big bucks on a branded one which you will only use once.