120s saildrive cone bolt

[Mrstarskydean]

Removing my prop to install a new anode and antifoul. The cone bolt is a hex and I discover a rather worn 'washer' on the end of the cone. Inside the end of the cone is a recess that could take a bolt.

Question. Put back as is? If not what bolt? Looking online it appears I have the old cone with plastic washer - bolt no longer available...... I'd rather not go to the expense of a new cone etc.....

Many thanks for your wisdom.

 

[VicS]

Check Keypart.

I think the hex headed bolt may have been replaced by a socket headed screw

https://www.keypart.com/volvo-penta/saildrive/120s

 

[Yngmar]

This one: Propeller Cone Locking Screw - Loctite required (in stock)

Dry Loctite already applied. Be sure to reapply if you remove/refit it.

Torque cone 70 Nm, locking bolt 20 Nm.

 

[Mrstarskydean]

This one: Propeller Cone Locking Screw - Loctite required (in stock)

Dry Loctite already applied. Be sure to reapply if you remove/refit it.

Torque cone 70 Nm, locking bolt 20 Nm.

I have this from those great people at Keypart - perfect. Many thanks