wingcommander's latest activity

Yes, very simple. Through hulls do not meet the conditions where galvanic action is possible so introducing an anode does nothing...

Similar case on my Vancouver 27. No shaft anode, so big hull anode showing signs of wear.Small rudder anode . However all my through...

My guess Jester Atlantic Challenge...2008

Reason for removing? In preparation for what ?

Agree looks like an olive thats been tightening really tightend with the pipe not fully inserted. Also, difficult to tell from picture...

One other point. You will not empty the calorifier through running the taps dry . This only pumps the storage bags out. Your calorifier...

Get a tungsten blade scraper from screwfix the pull type is my preference, round off the corners and away you go .Much better than...

Well I have Google searched and found nothing to concern me . Maybe a poor install, trapped cable or restricted ventilation. Would...

Really , do you have a link to any information?

I have Engel 40l (the grey plastic one) . 4 years and excellent. Very low wattage in fridge mode 5'C and will freeze down to -18. Bad...

Does the pump speed (Click) modulate down immediately or is it and fan running full clack . Their is a noticeable audible difference...

My 2KW CHINASPACER. One outlet circa 6mtr of run is too hot to keep your hand over outlet after ar9und 10 min of operation . If that helps

Agree, those flex couplings can have a mind of their own . Mind you looking at my now 24 months temporarily install ( to be made...

A female thread (tapered or parallel) and male thread is a common type of joint connection alone . Not requiring olive or flanges...