VicS's latest activity

The modern ones are different. . The handle fitting is different (no longer a square), The handle is shaped and a stop incorporated...

Generally you should not mix the old low silicate type antifreeze with the more recent "advanced"/ "long life"/ "OAT" type although...

Sounds as though the carb needs cleaning. .

New float. .... part number 13250-97J00 .

Tried heating the housing with lots of boiling water ? Maybe the only way will be to cut off the lever and drill out the plastic shaft...

FAT = Forum admin team. But you should not have needed to re-register as a newbie because of a new computer or a new email address. You...

Hawk House sell these "face off " discs for glue removal. I tried something similar but did not find it effective I eventually...

You don't say what engine. Are you sure your tach should not be connected to a sensor on the engine?

I'm not sure why you want to remove the power head It may just be stuck by the gasket or the drive shaft may be rusted into the...

Do these diagrams help ? See the section in your owners manual describing items to be inspected every 1000 hours or 4 years Yanmar...

If the pump performance is poor it is worth removing stripping down and cleaning the valves ( also examine the diaphragm, but a...

It's obsolete but there was someone selling a limited range of spares a few years ago . I cannot remember who and I cannot find them now.

Yanmar Long Life Coolant, which is red, is suitable for all Yanmar engines.

The lock you mention comes in several sizes . Choose the one appropriate for the distance apart of the clamp screws. This site explains...