Stemar's latest activity

One of the reasons Formula 1 got the job of servicing my car was because I had some new tyres fitted, and I saw the guy tighten the nuts...

It's broken the seller, and it'll break you. Alternatively, an ideal candidate for Leo Sampson's next project.

My 3' persuader is similar. There's also 5' of scaffolding pole lurking in a corner of my workshop I also have one of these that lives...

If you have to buy a multitool for boat work, I would suggest that a cordless one might be a good idea. Do get a decent one, though. I...

The boat must be 30-odd years old now so, if it's original equipment and hasn't broken yet, I doubt it's going to. It may be useful it...

I don't think you need 1/2" drive sockets in your every day toolkit. A 1/4" & 3/8" set will cope with almost everything on a boat and...

Presumably, that would have been a function of the hull shape needed to lift as the ice pressed instead of being crushed.

Looked at the trees lashing around, decided not to go to the sailing club. Had two croissants, a muggacoffee and stayed home.

The trouble is, if they're loaded with fridges, even if they do fill with water, they'll still float.

A bit late to the party but, assuming they're slotted heads, could you cut a new slot at right angles to the damaged one? A bit of heat...

I'm sure the MAIB investigation will make any necessary recommendations. I wasn't there, so I'm going to go against all forum traditions...