rotrax's latest activity

Indeed. Volvo here quoted £ 1.780 for a coolant and oil heat exchanger service (cleaning) on a 200 hp TAMD-series green lump. This...

Thats OK for service parts-Yanmar dont make many of those. Some years ago I needed a head gasket for a four cylinder Yanmar diesel. It...

Probably not fitted with the Balmar 110Amp Alternator like our boat. Tremendous load when the field coil is fully magnetised for its...

Great Advice. Our Yanmar 4JH4-HTE uses genuine belts up rapidly and they make lots of nasty black dust as they wear. After changing to...

Butyl tape, perfect for all above water sealing. Clean, cheap, easy to use.

Just done two International flights, no trouble or major queues for check in or passport control. If you have hold luggage you might...

Talk about over analyzing. The 3 point contact is only when climbing. Once at the desired height, do the job with both hands. I use a...

My view is the day I stop learning is the day I am put in the ground. Life is a continuous learning experience

When I passed my driving test, my instructor said, "Well done! Now you can learn to drive." That was well over 50 years ago, and I'm...

Usually you use an interface pad between the sander and the disks, Mirka do good ones, then the only velcro that gets worn is on the...

Usually only have this problem with cheap disks. I now cut my own from a roll of the mesh type abrasive like Abranet, better sanding and...

As long as there is a Diesel power to have a place...

You obviously dont know the right people.............................

I replaced the filler neck on my bowman aluminum heat exchange some time age. I got hole of a new neck with a 1 1/4 " BSP thread and...

Our Dometic 40 litre fridge/freezer is usually used as a freezer, set at -18C. Never have any condensation outside. It is a first...