PCUK's latest activity

It just needs a bedrock dredge and a sea lock to resolve all it's problems.

I had a 65lb Danforth on my 12M steel cruiser displacing 14 tons. It never let me down, even in a gale anchored off Sheerness with the...

Still, it's movement. Not holding my breath but still hopeful that someone will make a job of it.

Wire it directly to a battery to see if it actually works before doing anything else.

If you can't find anyone I can make them for you at a sensible price but you'll need to get the foam to me. Near J27 M5.

If I recall, the Halyard seal uses standard lip seals so should be an easy refurb'.

6mm mild steel. Epoxy coated. Cheap from scrap yard and massively strong.

Steady Fred!:mad:

I have recently used the new 3M washi tape that has a sixty day life. Very fine edges as well. Also Pro-Dek gives a very fine edge from...

Also masking over the cove line tape may pull it off.

The button should not need to be pressed when going into gear, either forward or reverse. It should only be pressed in when you want to...

A heavy steel boat will do what you want and won't skitter about like plastic. You will need to practice a lot to begin with. After that...

Roll it up tightly.

If the gearbox is staying in place and is bolted to the tunnel then it should be fine as that is where the seal will be.

Can't you make a simple shelf to mount them on so that the ones that are available are upwards?