PaulRainbow's latest activity

I recently moved my bow thruster battery to install a freezer. The original builder battery installation had a base made from 8mm...

As others have said, 12mm ply fixed with CT1 or OB1 will be fine. Clean back to GRP for the best adhesion, if done correctly you'd...

if I got that right, too tired atm, it should work, only make sure that you have the thermostat for the water cooled compressor in the...

Yes. Couple more photos showing the use of CT1 In first one the mini bulkheads for the bookshelves are bonded to the GRP hull and in the...

Well done! I read some of the drivel on here sometimes and despair!

Indeed, along with an Italian turne up. Ours got one unintentionally when we raced back across the channel with a F8 threatening. We...

Hi Plum, I haven't seen the OGA's feedback but I would expect it to be knowedgeable on handling these wondrful,old vessels. I do know...

Go sailing.

We are going around in circles gents. The original plans are in posts #11 and #13 As for barges turning, see post #19 Of course, all...

Get one that allows more than one 0183 device, although i can't see anything other than the Onwa that's 0183. These will both be...

Likely i50/i60. Depth transducer will likely fit the i50 Yes to all of that, keep the autopilot control, although you can engage it...

Looks like it.

I stand corrected, it will work with the E classic, but not the C classic.

It will, it's the digital radome. It will also work with later c and e series, a series and eS series. It will not work with the models...

Thank you massive help