PaulRainbow's latest activity

There you go, just connect it to one end of the backbone. Cables are available in 20m lengths, if need be.

From sarcastic to facetious, some people do not deserve help.

Max length for a drop cable is 6m, doesn't matter how many joins there are. N2K mast head wind units usually have an interface below...

@Colvic Watson Why do you sarcastically keep liking every post that's trying to help you ? What's wrong with you ?

No need around the anode. It just has to have electrical contact with the tab. The border round the drive is to isolate the aluminium...

Thanks for a great reply. Yes, Sense was already installed. Then I will just disconnect the brown excite wire and use the engine...

The thing at the bottom left of the diagram says "regulator wiring harness", it isn't meant to represent a bundle but connections...

Very sad to hear! I’ve had lots of bits and pieces from Seascew over the years. A great range of products all in one place!

In that case, disconnect the two excite wires so there is no alternator charging. No need to do any more to stop it charging completely.

Neither, stop randomly joining wires together, see post #25

If you want t change from the external regulator to the internal regulator you leave all the wring as it is, with one exception, you...

Did you read both the links? I think there are references to various differing set ups and earthing arrangements. Anyway I really cannot...

Your enquiry probably resulted in an "oh bu**er" at PLA central :)

Yes, it does matter. Fixed installations in boats are not the same as portable installations where no Earth can be used (which is what...

If that's the case, it's a fixed installation. The fact the generator might be standing on deck or in the cockpit doesn't make the...