oldgit's latest activity

  • O
    oldgit reacted to Jim@sea's post in the thread Pulling twin KAD44 with DPE drives with Like Like.
    I would also walk away. I once viewed a 33ft motor sailor which was 9 years old. It was in the water. I asked the boat broker to...
  • O
    oldgit replied to the thread East Coast prop refurb?.
    Can recommend Invicta they have repaired props which other repairers have suggested are beyond saving. You can actually go into their...
  • O
    oldgit replied to the thread Email from TMYC.
    8000 boats. ? 44 Locks. 200 Navigable miles. ? 44 Lock Keepers.
  • O
    oldgit replied to the thread Engine No Starty....
    For those interested the Yanmar part No is 129100 - 77910. Fitted perfectly. 5 min job. Going to order another as a spare. Ebay...
  • O
    oldgit replied to the thread Help needed guys..
    The Unvarnished Truth. Do not mess about, nothing worse than doing half the job and then having to lift the boat again a few...
  • O
    oldgit reacted to volvopaul's post in the thread Nicho with Like Like.
    I am sad to report the death of Mike ( Nicho) of this forum , Mike had been a long standing customer over the years and well know...
  • O
    oldgit replied to the thread Engine No Starty....
    (y) Was going to knock something up with a ordinary vehicle relay and a Lucar or two , but purchasing this relay suggests to the casual...
  • O
    oldgit posted the thread Email from TMYC in The Thames Forum.
    Its 2025 not 1955 ?
  • O
    Yanmar. One of these relays is £200.00. The other is £20.00 and came within 48 hours from exotic parts in the deep South.**...
    • starter relay.jpg
  • O
    oldgit replied to the thread Advice on re-sealing P-bracket....
    Remove and reseal. Especially the bolt holes. Done the job on several boats due to bending various "P" brackets. Personally used CT1.
  • O
    oldgit reacted to michael_w's post in the thread Advice on re-sealing P-bracket... with Like Like.
    Take it off and start again, it's the only solution.
  • O
    oldgit replied to the thread D4 260 Exhaust Elbows.
    It might be worth taking into account that both the risers pictured quite probably had not been changed for years and years. (Decades...
  • O
    oldgit posted the thread Big Tides . in East Coast Forum.
    Big tide and a "fresh" breeze, over topped the river bank and flooded the field next to RCC clubhouse. Not sure it will do the...
  • O
    oldgit replied to the thread D4 260 Exhaust Elbows.
    " I've noted a bit of crystalised salt coming from the bellows / exhaust elbow join" Exhaust Elbow ? are we talking about the cast iron...
    • 1743490885302.jpeg
    • 1743502605691.jpeg
  • O
    oldgit replied to the thread Anybody know who makes these....
    Thanks all have passed on the info.
Top