Measured the pipe again - this time with a micrometer ........... 7.93mm. That's better, it's a 5/16ths compression fitting with a hose tail that's required. Already ordered.
Many thanks for the advice and the ensuing discussion.
For the record, my boat has a very small galley area and the...
Thanks everyone for the advice and opinions.
As far as the hose is concerned, it's going to be the orange HP option because I've already completed all the pipe and hose work other than the final connection to the cooker.
The compression to hose-tail or (Fulham nozzle) is my favoured option, but...
I'm installing a Plastimo butane cooker and need to make the final connection to orange gas hose. The hose is 8mm internal, which has been fine for other connections with hose-tails etc. but the tubing on the cooker, when measured with a vernier, is 7.5mm and even with two Jubilee type clips...
I've got the sextant, but I need to practice using it. If there's an artificial horizon gizmo going spare I'd be happy to exchange some beer tokens for it. Then I can have a go in the back garden.
I'm looking for a pair of Clyde Cleats i.e. 4 stands to make 2 cleats to put on my classic restoration.
Ideally the smaller size that'll take an 8" - 10" timber bar.
I've got the timber!
Can anyone help?
I know that this is a bit of a long shot, but I'd like to get hold of a Garmin data card with updates for a whole lot of units including the GPSMap range 29#, 39#, 49# etc. My unit is a GPSMap 292, but it would appear that the data card had a myriad of upgrades on it.
The version I need was the...
Last time I wore mine was four years ago on a oldies trip to the gritstone edges. The local young cragrats couldn't believe what I was putting on. They were trying to decide if I was Mallory or Irvine!
Great for climbing, but not for falling. I now have a far more boll**k friendly harness!
It...
I have these bits 'surplus to requirements' if anyone is interested:
1) A new, unopened, 500g box of 13mm Fine Cut Copper Tacks.
This works out at approximately 1000 tacks - £10 +p&p
2) Brand new Vented loop, made by TMC, for pipes with 25mm or 1" internal diameter.
Overall sizes approx. 145 x...