IanCC's latest activity

Do you know the copper coat is as old as the boat? I would see copper coat as a bonus. If its still working whats the problem? If it...

What thickness of messenger lines were they using. We bought a cheap 100m reel of something like 5mm line for halyard messengers. If...

When you say it is connected and tested do you mean it has an electrical connection with relatively low resistance? It could be that a...

Wire brushing zinc anodes is a common practice but there are others that say never to use a wire brush as it leaves particles embedded...

I always consider anodes are a good investment and have often replaced them while they still have remaining life. I have sometimes...

It is all connected and tested. Connects to bell housing then through r&d coupler with little springy thing inside plus a cable on...

Scutch?

Use an image resizer like this imageresizer.com If it is only connected to the shaft and prop then it is probably not doing anything...

Here we go.

Hi, my hull anode seems to have plenty of thickness but has this hard yellowish layer that won't wire brush or chisel off. It gets...

Mine, 30 footer, thruster from start battery and my cables are 70mm sq. So circa twice as big as starter cables. Might be spec'd wrong...

Just endless adverts for lamps that looked a little like the one sought but clearly not the same. It seems to me Google doesn't really...

First and last time i try that.

When i did my hatch it was recommended to me to usw chewing gum remover!

Can’t recall, as doesn’t currently affect me directly, not at present sailing in EU. Think the fines were not too steep financially, as...