Humblebee's latest activity

There are other suppliers, I used SML paint and beads. Granted I am on board a lot less than you but it seems to be holding up well and...

Earlier this week I gave a Zoom talk to the Westerly Owners Association and a hundred people watched. This is the PowerPoint...

Interesting link, thanks.

Bit of a drift but when I was working in quarries we used ammonium nitrate mixed with diesel as a cheap, fairly powerful explosive. A...

The whole anchor holding capacity is moot if you don’t know how much load your boat will put on it in the conditions you might expect as...

I'm just so glad that I can anchor successfully without knowing or caring about all the mathematics that some seem to need. 😀

There’s no such thing as a worst anchor. It’s just that you have the wrong bottom. I do have a fake Bruce that requires a JCB to dig a...

Interesting link bergie, thanks.

Our boat came with a stainless Bruce clone. Here's my only photo of it in action, providing us with a steady supply of waterlogged...

This is my main distribution connection panel It used DIN rail terminal and relay bases. The wiring are red for 12 vdc+ with pin crinps...

A row of Wago connectors under the deck, epoxied in place, works well with mast wires that may need removing.

Trouble with those you cannot get them through a small deck gland. Even difficult to get through a hawse pipe..So not really suitable...

I use this type of connectors for the mast wires 520-210-003-KITRS | EDAC, 520 Panel Connector Panel Mount, 3P, 8.5A | RS very small and...

Thanks Monty, they look like they might do the biz.

Thanks Fred, Neil and Paul, I think you have pointed me in the right direction. One to explore over the coming months.