gregcope

@Daverw what Amps capacity is your BMS/battery? 150A fuses implies 100A draw from each.

I did the same as @geem and sleeved my battery tails to the fuse. My runs are about 600mm (24”?). 7” feels like its literally next...

Depends if you want to cycle different packs equally. If there is a (large) delta this may not be a concern. Over time it could...

Agree with @Trident. I would challenge that assembling packs is “not that much”. Consumables add up and you need tools which many...

My JDB SP04S034 200A BMS will deliver (according to the datasheet); 210-250A for upto 15-25secs before a Primary discharge overcurrent...

I kept my 1-2-both switch and labeled it up as to only use “both” in an emergency. No. 1 is a Sealed LA AGM start battery which has a...

Extra holes conduit for the cables you might need to add later?

In my manual it has several references like this; "Make sure the state of charge always remains ~ 50 % during storage." For <12months...

.

I have a near 10 year old one. They changed the batteries to larger 900Wh ones in 2016? So check the battery capacity. Its marked on...