Gixer's latest activity

I’m getting DinghyMan to do the job for me. I really don’t have the skills to do this properly, I’m a bodger 😂

I would see if I could push the bush out of the headstock so I could measure the o/d of the bush and the o/d of the bolt would give the...

One way to solve the problem is to get the sleeve driledl out and bushed to suit the long bolt . How much playis there in the bush, You...

I could make and fit you a bushing, not down south but I've done plenty of work for people on here - as mentioned above and see site in...

Thank you guys, really helpful. I’ve just PM’d DinghyMan :)

Sorry I didn’t explain it clearly. That long bolt in the picture on the left hand side with two nuts on the end passes though what...

I need to get the bushing replaced in the rudder headstock, It’s the bushing with the bolt for the tiller. Does anyone know anybody in...

I sailed on one for a few years, club racing and a few channel crossings, the layout on that one was three cabins and two heads. It was...

The most annoying purchasers are the one that want money of for problems/faults that you put in the advert.

Seriously, if you can't live with the birds in Langstone and Chichester, you may not be welcome. There's another nice little harbour...

This is where not having the tallest mast in the area is useful :)

I’m not sure TBH, I’ll keep playing around.

It sure about a jammer but Barton do a range of fittings for 25mm T track, fitted my upgrade yesterday and today fitted new sheets,

I went out today with the sole intention of moving the cars around and seeing what happens. I came to two conclusions, 1. The cars need...

That’s my reasoning as well, just fitted the Barton sliding cars today, took longer to do the eye splicing on the lines to fit the cars...