geem's latest activity

Why drink chemicals when you only need to dose the tank at the start of the season then flush it a couple of times before filling up and...

I would add, I have posted about this recently, that the addition of a pair of 10" clear water filter housing after the pressure pump...

Engine coolant is usually circulated through the calorifier by the engines own water pump (coolant pump not raw water pump) so only...

I have had my Spade anchor galvanised. Extracting the lead wasn't so hard. One of those burners used by roofers that do flat roofs got...

I did the same as @geem and sleeved my battery tails to the fuse. My runs are about 600mm (24”?). 7” feels like its literally next...

I try to get my NH fuses as close to the battery positive terminal as I can. ABYC suggest 7" but the best I could do was 10". To...

I wonder how much it really matters to keep the main +ve and -ve runs the same lengths? LFP has a very flat voltage curve so there will...

I did on my first LFP build but with my latest with EVE packs I have not bothered. All the negatives are at the same length from all...

This I'm not saying the UK /EU standards are not good but I find the ABYC to be safer and more thorough in its recommendations so...

I am guessing that is just a diagramtic. There are no dimensions.

As close to the batteries as possible. ABYC say 7", ok that's not a UK standard but I can't think of any reason to have the fuse any...

Same with my one

I agree. The dies that came with mine had numbering that made no sense. It didn't take long to realise what dies to use for what lugs...

The ones I have work fine. I think bad crimps are operator error. Thr hydraulic pressure is huge and the crimps work but the cheap ones...

No I am not. Read post 117