Recent content by Drumm

Just received my new Ellebogen mounts here in UK. Great service, price and fast delivery. On initial inspection they look excellent. Just need to fit them to my Malo37, replacing the 16 year old Yanmars.

Yes saw SVB, looks best option for buying a direct replacement. I was hoping to replace with a stainless steel version from a different manufacturer. I need the dimensions though to order.

Could anyone please let me know the dimensions of the gas spring / strut used on a Selden Type 10 (1200N) Rodkicker? I can't get to my boat to measure the old one. I would like to buy a replacement, preferably in stainless steel but need the dimensions. There are numerous threads relating to...

Thanks for all the replies and advice. I made a closer inspection of my boat and found that where a large anode has been fited to the hull towards the stern, the protruding stainless steel studs inside have been used to create a common ground plate of sorts with a number of earth/ground cables...

Hi, I'm about to install a Raymarine E7 MFD to the cockpit of my SO32i. Does anyone know whether the Jeanneau SO32 has a dedicated RF ground and if so where is it? The Raymarine has a separate RF drain wire in addition to the 12V red +ve and black -ve wires. The manual says that the RF drain...

Hi, I have emptied again.

Stoshak - sorry, I have now emptied my box! Thanks for the information regarding the cylinders, it's good to know that you haven't needed to replace them. I am going to drop the keel next week and replace the Dyneema rope and"friction rings" (as Jeanneau refers to them) either side of the keel...

Thanks Plevier, I have PM'd you.

Hello, I'm resurrecting this thread as I've just purchased a 2005 SO32 with lifting keel. The boat is in excellent condition but the surveyor did recommend that I changed the lower Dyneema strop and the bushes. My question is how do you access the bushes? From a diagram I have found and by...