DavidJ's latest activity

Bed Levelling ..... I have an Ender 3 Pro - adjustable bed and another budget machine with fixed bed. Over time both started to...

It depends on if your printer has the facility to manually level the bed. My own printer is an Ender 3 Pro which is considered archaic...

I broke this quite meaty (Italian) spring over the winter in Alghero and it’s only a 37 ft boat. You are right in looking at Osculati...

A general question which may be useful for others. I have an option on Bambu for my P1S to switch off bed levelling. Is bed levelling...

Usually learned the hard way, but you leave home with a couple of mates, fuel up and when you reach the slip way it’s blowing a bit more...

Enquire about getting the ICC (International Certificate of Competence) at the same time. Useful to wave at officials if you do take the...

Stick to lakes. It wouldn’t take too much of a wave or wake from a larger boat at sea to totally swamp that large open area.

I didn't make my own filament clips - I just downloaded some using Bambu Studio. Open Bambu Studio - click "Online Models" then search...

Hi Mike Realised yesterday how useful your clips would have been. Yep! Filament everywhere. You have my e-Mail, would you mind sending...

This guy posted this about 2 months ago - just after they "froze" the development for new features. Although it is all about the new...

I do a lot of 3d printing. All my stuff for boat that its outside is from PET-G. I am using Fusion 360 as it's free for personal use and...

The horn operates by the diaphragm being drawn in by current, this action switches off the current by means of a contact breaker on the...

I’m on the same FreeCAD learning curve. All I will add is be careful with YouTube instruction videos. Some are from very early versions...

Or older! Our Broom Ocean 37 is in that price bracket and is 45 years old, and we are the 3rd owners from new, the boat was about 40...

Size is not to be feared. The only consequence is cost / fuel / berthing / anti fouling.