dansaskip

Pretty sure clipper ones fit , it is what I used after the Furuno one died

It really is quite easy to reduce the size of of the photos as long as you have a computer - there is usually some bit of software...

Winterising an engine is a good opportunity to, flush out salt water if raw cooled, check the engine anodes, check water pump impellor...

I have both fixed and handheld on my boat. As others have mentioned the range of a handheld can be limited. Sometimes you need the range...

Therefore a consideration, unless you are a 'man of means' should also be the maintenance, mooring and overnight visitors costs. They go...

Only done the outward bit as I stayed in the Caribbean but I planned to leave by 1st Aug although it was a few days later. N Wales...

Surprised there was no wiring instruction/diagram if it is a new LED?

If “use” does in fact mean “enter” then I have flouted this rule several times this year. From this, I think we can establish that...

Often its better to assume ancient rights of passage rather than ask. Then if the Harbour Authoritiesetc complain one had declare...

Do you have a mark on the wheel showing at the top when central? Lots of examples of neat ropework which can be tied on the wheel - but...

It's the having to send the motor back to California for reprogramming that struck me as mad as a mad thing. This whole sector is just...

Thanks tillergirl for bringing this to our attention. I find this rather worrying. I have used the route Foulgers Gat - Black Deep no 3...

You have said it yourself - it the sail is ancient and the UV strip in tatters then the sail is probably well past its best - or...

Ah but you wouldn't use stitching - that is why I specified using a splice. The strength of the right size of dyeema is 4,800kg for 5mm...

As he says do not use webbing. Use dyneema instead. Easy to splice and make up your own and much more resistant to UV and it doesn't...