Recent content by Buzz

  1. B

    Drive belt spray

    Re: Isn\'t that infuriating? You can get belt dressing from BSL look in the yellow pages under engineering supplys or do a google search for BSL they have branches all over the place. Or as a tempuary you could rub a candle around the inside of the belt this a trick we use in my trade from...
  2. B

    I give Up

    That sounds like my falcon i am thinking of renaming my one "Leaky"I thought i had cured my all my leaks at the end of last season started her up at the weekend and the seals in the raw water pump let go result one bilge full of water,rebuilt pump quickly on sunday so hopefully it should be...
  3. B

    river Medway

    The medway is not that bad, non tidal bit is o.k but not that many places to moor overnight unless you belong to the local cruising club or you use the free moorings at maidstone and tunbridge,there are also moorings at the malta at allington and from memory at the anchor and yalding(food not...
  4. B

    Wiper motors

    Re: ASAP Supplies.... Land rover series 1 wiper motors work as these had the wiper arm mounted directly to the wiper motor.The landrover motor is identical to the one fitted to my falcon albiet without a chrome outer cover <hr width=100% size=1>Hmm your getting me confused with someone who cares
  5. B

    Hot aircon

    You will proberly find that the rust coloured liquid is the result of the suction line sweating.This may indicate that the airflow to the evaporator is restricted in some way I.E blocked filters or return air vents blocked.If your unit is sweating back your gas charge is generally o.k the reason...
  6. B

    VP Drive Belts

    In my line of work I deal with a lot of belt drive compressers,when I was a apprentiece I was shown how to stop belt noise.its one of those old tricks that gets forgotten Rub a candle on the driving face of the belt its ,gonna be cheaper than belt dressing!! I have just had to do this on my...
  7. B

    Help in getting afloat

    well.....this season I find my 20ft Bilge Keeled Voyager sitting high and dry on the mud flats just next to the Marina. I am nearly two metres too high for any tide to even reach my keel in the next 3 months, and my only option is to drag it down to the water level. Can anybody out there offer...
Top