Recent content by bristoljim

Thanks for you your reply - the turn round time for the rebuild is about 2 weeks - never had any great difficulty with spares over 20 years of commercial operation.now replaced with John Deere Jim

Hi - track & car are for the IYE 32mm C series ( track width is 32mm) Cheers Jim

Will throw in track with car for the track postage

Still for sale

Still for sale

Sill fpr sale

Still for sale

Still for sale

IYE MAINSHEET CAR 2 X 4 WHEEL CAR WITH CONNECTING BRIDGE PIECE For 32mm C series track. Main sheet car: £100 + £5 Postage =================================== Also SECTION OF TRACK 2.2MTRS LONG, CURVED BY IYE 100mm in 2.1mtrs - both new (a few storage mark on the track) Track: £50 + (No idea...

BMC 2.5 ENGINE WATER CIRCULATING PUMP USED & NEEDS RECONDITIONING I have used a reconditioning company in Birmingham several times who are very good but its not cheap with VAT & Postage (about £100). £20 + £7.5 Postage.

JABSCO PUMP 1950-HD 3/4" Ports Flange spigot 85mm 14 spline 31.mm New old stock £75 +£5 postage

JABSCO PUMP 2114-20 1" ports With ford gear 95mm Diameter, 31 teeth helical New old stock £150 + £10 postage ref: jab2

JABSCO/JOHNSON PUMP F35-9004 3/4" ports Flange OD 70mm Spigot OD 35mm 13 splines 18mm Dia New old stock £75 + £5 postage Reference: Jab1

Long shot - has anyone got a 1/4" foot mounted jabsco pump gathering dust in the garage - models 6640-200 or 2760-2001.I think these were fitted to the little watercooled Petters thanks Jim

Any particular bit you are looking for,i have had several vires in the past so various bits remain. Jim