Beneteau381's latest activity

Exactly how it is. I'm convinced the rapacious vultures that run my nearest marina would charge for the air you breathe and the...

You never win with a boat yard. Every service comes with a charge. Yard near me once on there land basically your a hostage.

That’s why I bought the wrong valve, I looked at the Jabsco heads tech data. That’s why I have put this on here, mr google picks the...

Yes, appears to be common with Beneteaus to use 1 1/4 inch seacocks and skin fittings for the heads outlet. Although the Jabsco heads...

And of course they will all fit each other with a good sealant, the TPI is the same,just a different thread angle.

It's pretty straightforward as mentioned above.Im 1/3 through mine,did Fore and backstay last winter,doing caps this coming and will...

I would definitely renew at 10 years. Not worth the risk. If you are reasonably handy, as most yachties are, it is a very...

Use a grid tie invertor from the solar.

The seacocks have the imperial size printed on them. All of them. Some are original but imperial.

Ours on Beneteau 381 lasted twenty odd years then cratered with much groaning. The magnets are stuck in the motor housing with glue, the...

When you look at what sailing channel Evans had to do just to get at the keel grid, the work to repair is going to be extensive and took...

My air gun pump does that pressure but not a lot of volume😂

Yes, I was diving with SCUBA in the mid 70's. No fancy instrumentation and buoyancy was controlled by the residual air kept in our...

Just for the record my Beneteau 381 heads outlet pipe is 1 1/4” . The reason I am putting this on here is to help others who search like...

Brick cleaner in the UK. Agua Fuerte in Spain. The latter certainly works. Used it on our liveaboard yacht and our school yachts. Plenty...