Alicatt's latest activity

Bit cold ‘ere Sleeping over onboard tonight too 🥶

The Towel Rail heater has proven far better than even those initial results indicated. We have had nights of cold ... dropping below...

So far after 18months no fogging on my HX890E good little radio, I used an adapter to take the antenna socket to an SO239 so I could use...

I have a TengTools combined 1/4", 3/8", 1/2" set for use in the garage and a TengTools 1/2" imperial/metric set for the boat Also 3/4"...

Just seen this post. My boat is mid 70's and has a lot of imperial nuts and bolts and a lot of the aluminium castings (sowester?) take...

I was lucky enough that the previous owner had fitted a pair of Racors for each engine before the engine mounted diesel filters, looking...

As a UK resident and before the B-Word came into force, I had a new car of British manufacture built to my spec to comply with the...

Windy here today as well, 2 olive trees were blowen over, lost a few olives :cry: Hunter is well lashed to the bollards, was checking...

Seeing the speed that the crane operators moved the containers around at in Zeebrugge nearly 20 years ago was quite an eyeopener for me...

The Container gantry drivers are a) stuck to a time schedule that is tight ... b) they just lift / put container where told.

On the Garmin I use Navionics charts. Before I got the Garmin I used my Android tablet to run the Boating App which is Navionics. On...

They usually have a plan of where each container is going and it's weight, and a nice piece of software that calculates the order that...

The jocks are very moody.