Alex_Blackwood's latest activity

Fully concur with that statement. However, there is a big difference between a car and a boat. Being stuck at the roadside waiting for...

Have you got a "Lip" on the pully where the washer fits? If so you may be able to Peen that over with a small ball been hammer or punch...

You only have to look at some of the questions, and answers, in this forum to to get an inkling into that. Not just electrics but...

You don't get anything for nothing, but I doubt anyone would notice the change. There's perhaps the same number of Ah to be generated...

As has been mentioned if you do fit a larger alternator of which there is no physical problem with the caveats also pointed out it...

If your existing 30 amp alternator is charging the batteries without being overloaded, getting exceptionally hot etc. then just upping...

If the system was working previously it would indicate that either you ran (1) with the emergency switched closed, (2) you have a VSR...

From what you say it could, if there is no evidence to the contrary, it may be just be a push fit. If so I would have thought that a bit...

Absolutely no point unless your batteries and system can take the extra output. Is your 30 amp Alt. being overloaded with your present...

Yes you can. (See #13) You should not use an adaptor to go from 32 amp to 16 amp. Unless you use some form of protection such as :- 32A...

And a 16 amp on the right. He cannot, or should not have a plug both ends, never mind different amperages! The user end should be a...

Apologies, I misread your OP. 😵‍💫 What he needs is the 16 at the bollard end or a 32/16 reducer. As you have indeed suggested. The CSA...

Sorry to be pedantic but think you mean 16 amp at the bollard end :unsure: :)

You post so much mis-information that i couldn't correct it all in a lifetime.

You really do need to stop posting incorrect stuff like this !