Alex_Blackwood

You were absolutely spot on. I sourced a 20cm diameter UV resistant "O" ring for fiver and it's now on the boat. Many thanks.

see post 21. If not, then get an electrician.

Think he has had a spider in! :ROFLMAO: Seriously if what he has drawn was done by an electrician, he needs a second opinion! One thing...

Not sure about the 28 but certainly on the 10/14 you didn't drain the coolant and the 28 manual implies similar.

Hope you have written your will! :eek: 😵‍💫 :ROFLMAO:

Yes, it will be fine.

The video in Post #8 shows how to do it. The size of the cable only dictates the minimum diameter of the coils can be. So, if you wish...

Yes would be fine. Again finding 2core 2.5 mm is not easy, most of it is 3 core for mains leads etc. A search for 2.5mm 2core curly...

At a guess, probably not, that cable is more like flat twin. As far as I can make out from the picture. I think that you will have...

You should maybe get an electrician to sort it out for you. A couple of hours could well save wrecking you charging system.

Just a word of caution, if you can get the alternator checked before you buy a replacement, may be an an idea as there is just the...

Did you read both the links? I think there are references to various differing set ups and earthing arrangements. Anyway I really cannot...

Paul, It doesn't matter if the geny. is in a boat, in a plane or Joe Bloggs garden shed. The proper, safe, installation should be used...

Typical generator/inverter thread, where one or two people know better that the regs, standards and manufacturers and feel qualified to...

I am not getting involved in this ongoing saga re. generators. Some light reading attached. 😵‍💫 I would also suggest that if you are in...