Caladh

This thread is about the EXHAUST. You are describing a hot air duct, not the exhaust.

We too have painted in in situ for years. Never noticed this reported issue.

I use a paint brush on covers in situ. Often decanting spray bottles into a tin. Seems to work OK.

Refueller - out of interest, once the bug gets integrated into the fuel using an enzyme based treatment, is engine performance ever...

Sorry - it’s not ! I’m now thinking of the next steps….

I will not be drawn into comparisons .. sorry. I have to err to to the side of commercial NDA ... What I will say is that careful...

Thank you BM ... Your post now shows why you could not use additive to clear it. The scenario is completely different to OP and most...

Get a Yeoman plotter. Decide on your route by looking at the chart that you have picked. Insert any waypoints that you decide on...

I agree that filtering is not a bad idea - but its not an answer on its own. Treatment with Enzyme based Additive ... let it do its...

Anchored off Bognor will be the only wilderness left without a rally🙁

I wonder if a fuel polishing system would work? I set one a few years ago when I thought fuel, in the tank, all 400L of it, was...

Thanks so much for that. Wonder why non enzyme additives are sold if they leave the crud to gum up again.

Get some Enzyme based additive ... anything such as Startron will do the job. Empty your tank, get a PELA or similar to suck out bottom...

…..don’t forget the……anchor……nooooooo 😂😂😂😂

Thanks for that. Basically I need a fuel and tank clean then ?