PCUK

In contrast we had to take up a Dek-King deck to replace the ply and try as we might it would not come off the Dek-King. In fact it...

Thanks. Actually water should not get under the decking as the adhesive sealant on the deck also seals the joints when laid. The...

I must admit I don't have underwater lights I was just referring to the water and Watchet is particularly brown, but below Minehead it...

To be fair, the deep brown sea around your way is not everywhere. I discovered this when moving from Gillingham Marina to the West...

I am self taught and have done several boats using Dek-King. No longer available but Tek-Dek is the same. The planks are glued together...

The mig welder technique on You-Tube still seems the easiest and best.

Don't they need to be around the bolt?

There are several videos on You Tube showing exactly how to overcome this problem using mig. Search broken bolt removal.

Max RPM? LWL? Loaded displacement? These figures will be the starting point.

Any remote mounting heat exchanger will do the trick. I did the same on a BMC 2.2 in the middle ages!

Stainless Jack nuts will do the trick.

You can always add specific items to the set! It also doesn't include a trolley jack.

Have a look at these tool kits on Ebay. I guarantee they have everything you will need for general maintenance. Not the finest quality...

I know many people say the injection dredgers don't work as they definitely do. The problem is once the marina is cleared they need to...

Avoid repairing with anything GRP. Stick to traditional methods if you want to keep the boat looking original rather than “patched up”...