Unusual Eberspacher timer. Any info please?

pcatterall

Well-known member
Joined
2 Aug 2004
Messages
5,431
Location
Home East Lancashire boat Spain
Visit site
I have used quite a few of the ( similar ) 7 day timers but have now found two like these and would like to use them.
The standard model is a bit crude and complicated for setting the timings but has good diagnostics and ( quite rarely) can be used to free 'lock out'.
It would be great to be sure of the wiring for these and get hold of some instructions. ( some wiring I can determine by the 'values' at the connections)2020-01-30 11.10.05.jpg2020-01-30 11.10.05.jpg2020-01-30 11.10.05.jpg2020-01-30 11.10.27.jpg2020-01-30 11.10.27.jpg2020-01-30 11.10.05.jpg
I have tried the usual searches and the great 'le Toinkynitus' ( apologies for the spelling!!)
Any got one!
 

Yngmar

Well-known member
Joined
6 Dec 2012
Messages
3,060
Location
Gone cruising
Visit site
There's a very similar looking one on this page, complete with pinout diagram: Controllers 2

Same buttons, just display and dial are swapped. Seems to be custom ones for some car/truck manufacturers.

wpd009eb6c_06.png
 

pcatterall

Well-known member
Joined
2 Aug 2004
Messages
5,431
Location
Home East Lancashire boat Spain
Visit site
There's a very similar looking one on this page, complete with pinout diagram: Controllers 2

Same buttons, just display and dial are swapped. Seems to be custom ones for some car/truck manufacturers.

wpd009eb6c_06.png
Thanks for the try but I have the type you show, its the wiring for the one I show that I am having problems with. The pins the red/slate and brown/white were easy as the resistance across them changes as you adjust the heat setting knob. I believe I also have the red and yellow but am less certain about the blue/white diagnostic lead. Dont want to resort to trial and error!!
Thanks again
 
Top