• REMINDER - COVID-19

    Any content, information, or advice found on social media platforms and the wider Internet, including forums such as YBW, should NOT be acted upon unless checked against a reliable, authoritative source, and re-checked, particularly where personal health and liberty is at stake. Seek professional advice/confirmation before acting on such at all times.

    Users who are found to promulgate FAKE NEWS on the forum in regard to this issue, intentional or otherwise, may find their access terminated. It is your responsibility to provide references to bona fide sources.

    FAKE NEWS, in this regard, is that which is posited by organisations, media, etc., that is repeated on the forum, or used to support personal opinion/hypothesis posted by users - FAKE NEWS is not necessarily the personal opinion/hypothesis being posted in itself, any issues with such should be challenged respectfully.

Eberspacher 701 Modulator/Controller

CatkinMark

New member
Joined
4 Jan 2015
Messages
6
My eberspacher airtronic heater turns on by itself (apparently). All the programs are set to "off" on the 701 controller and without pressing the on button (3 flame symbol) the heater comes on at times that seem to bear no relation to anything that was previously set. The "c" (for continuous) symbol is on and I'm wondering if this is the cause. If it is I have no idea how to switch it off. (i can't find it in the instructions)
Help.
 

CatkinMark

New member
Joined
4 Jan 2015
Messages
6
No it heats up to whatever temperature setting is on the controller. The only way I can turn it off is reduce the temp setting to absolute minimum and even then it will come on if the temperature is very cold.
 
Top